COREX Plastic stand with reusable velcro option
Corrugated Plastic Stand
These stands are cut on 3/16" thick corrugated plastic. These are water proof and easy to use.
Each stand comes with double sided tape and with an option to add velcro to make it reusable.
When you're done, if using the taped version, simple unfold your stand and lay it flat against your board. If using the velcro, simply remove the stand and set aside to re-use on another backdrop later.
Re-usable backdrop stand details
60” tall
Hold up boards up to 80” in height.
3/16" Thick corrugated plastic
Lightweight plastic with hollow flutes
Waterproof & durable
For indoor use
Includes double sided stick tape pre adhered to the stand.
Add the velcro option for an easy reusable option
Adheres to any large rigid sign, backdrop, cutout or prop
How to use the velcro version
The velcro strips include two sides, the hook side and the loop side.
The velcro will come attach to the board. If an extra set is also purchased, that will come in a separate bag.
When you are ready to attach the stand:
1.) Peel the clear backing off the velcro (do not peel the strips apart, only peel the clear backing off)
2.) Keep the stand folded and line up the bottom half on the stand with the bottom of the board, ensure the stand it is straight.
3.) Lay the bottom half of the stand down and unfold the top half
4.) Press the stand firmly onto the board. Mare sure to press the entire way up, going over all the velcro strips
How to remove velcro stand
When removing the stand make sure to use both hands to pry up each strip, using both hands will help keep the stand from unwanted bending.
1.) Starting at the top use both hands (one on each side of the first velcro strip) to pry the first part up. continue down to the second strip
2.) Fold the top section over and continue to pry up the bottom velcro strips until the stand is free
3.) Fold stand a store for later
(If purchased) How to apply extra set of velcro strips
Velcro strips automatically come with the hook and loop sides. When apply the extra set of strips, you will only need the loop side since the hook side Is already attached to your stand.
1.) Pull your extra velcro strips apart, set the hook side to the side
2.) Place the loop side onto the velcro strips that are already attached to your board, press these down firmly
3.) Repeat the steps from the “How to use the velcro” directions listed above
Corrugated Plastic Stand
These stands are cut on 3/16" thick corrugated plastic. These are water proof and easy to use.
Each stand comes with double sided tape and with an option to add velcro to make it reusable.
When you're done, if using the taped version, simple unfold your stand and lay it flat against your board. If using the velcro, simply remove the stand and set aside to re-use on another backdrop later.
Re-usable backdrop stand details
60” tall
Hold up boards up to 80” in height.
3/16" Thick corrugated plastic
Lightweight plastic with hollow flutes
Waterproof & durable
For indoor use
Includes double sided stick tape pre adhered to the stand.
Add the velcro option for an easy reusable option
Adheres to any large rigid sign, backdrop, cutout or prop
How to use the velcro version
The velcro strips include two sides, the hook side and the loop side.
The velcro will come attach to the board. If an extra set is also purchased, that will come in a separate bag.
When you are ready to attach the stand:
1.) Peel the clear backing off the velcro (do not peel the strips apart, only peel the clear backing off)
2.) Keep the stand folded and line up the bottom half on the stand with the bottom of the board, ensure the stand it is straight.
3.) Lay the bottom half of the stand down and unfold the top half
4.) Press the stand firmly onto the board. Mare sure to press the entire way up, going over all the velcro strips
How to remove velcro stand
When removing the stand make sure to use both hands to pry up each strip, using both hands will help keep the stand from unwanted bending.
1.) Starting at the top use both hands (one on each side of the first velcro strip) to pry the first part up. continue down to the second strip
2.) Fold the top section over and continue to pry up the bottom velcro strips until the stand is free
3.) Fold stand a store for later
(If purchased) How to apply extra set of velcro strips
Velcro strips automatically come with the hook and loop sides. When apply the extra set of strips, you will only need the loop side since the hook side Is already attached to your stand.
1.) Pull your extra velcro strips apart, set the hook side to the side
2.) Place the loop side onto the velcro strips that are already attached to your board, press these down firmly
3.) Repeat the steps from the “How to use the velcro” directions listed above
Corrugated Plastic Stand
These stands are cut on 3/16" thick corrugated plastic. These are water proof and easy to use.
Each stand comes with double sided tape and with an option to add velcro to make it reusable.
When you're done, if using the taped version, simple unfold your stand and lay it flat against your board. If using the velcro, simply remove the stand and set aside to re-use on another backdrop later.
Re-usable backdrop stand details
60” tall
Hold up boards up to 80” in height.
3/16" Thick corrugated plastic
Lightweight plastic with hollow flutes
Waterproof & durable
For indoor use
Includes double sided stick tape pre adhered to the stand.
Add the velcro option for an easy reusable option
Adheres to any large rigid sign, backdrop, cutout or prop
How to use the velcro version
The velcro strips include two sides, the hook side and the loop side.
The velcro will come attach to the board. If an extra set is also purchased, that will come in a separate bag.
When you are ready to attach the stand:
1.) Peel the clear backing off the velcro (do not peel the strips apart, only peel the clear backing off)
2.) Keep the stand folded and line up the bottom half on the stand with the bottom of the board, ensure the stand it is straight.
3.) Lay the bottom half of the stand down and unfold the top half
4.) Press the stand firmly onto the board. Mare sure to press the entire way up, going over all the velcro strips
How to remove velcro stand
When removing the stand make sure to use both hands to pry up each strip, using both hands will help keep the stand from unwanted bending.
1.) Starting at the top use both hands (one on each side of the first velcro strip) to pry the first part up. continue down to the second strip
2.) Fold the top section over and continue to pry up the bottom velcro strips until the stand is free
3.) Fold stand a store for later
(If purchased) How to apply extra set of velcro strips
Velcro strips automatically come with the hook and loop sides. When apply the extra set of strips, you will only need the loop side since the hook side Is already attached to your stand.
1.) Pull your extra velcro strips apart, set the hook side to the side
2.) Place the loop side onto the velcro strips that are already attached to your board, press these down firmly
3.) Repeat the steps from the “How to use the velcro” directions listed above
HOW TO ATTACH YOUR PLASTIC STAND
How to attach your new plastic stand